Silo Hopper Angle: Preventing Bridging and Poor Discharge
Select a silo hopper angle using wall friction, material strength, outlet dimensions and feeder interface rather than a universal cone-angle rule.
Blog
Read MoreSilo Hopper Angle: Preventing Bridging and Poor Discharge
Silo vs Grain Bin: Storage Design and Material Flow Differences
Compare silos and grain bins by stored material, aeration, storage duration, discharge pattern and installation needs before specifying bulk storage.
Pressure Manway vs Atmospheric Manway for Process Tanks
Compare pressure and atmospheric manways using the complete pressure-temperature envelope, closure documentation, seals, access, cleaning and installation.
Titanium Rod Filter Cleaning and Regeneration Guide
Plan titanium rod filter cleaning with deposit diagnosis, approved treatment conditions, rinse endpoints, inspection, and hydraulic and retention verification.
Sanitary Filter Housing Design for Food and Pharmaceutical Processing
Review sanitary filter housing materials, seals, product paths, drainage, service access, cleaning evidence, and the separate requirements of sterile filtration.
Filter Housing Pressure Drop: Causes, Monitoring, and Changeout Limits
Interpret filter housing pressure drop using defined measuring points, comparable flow and fluid conditions, quality checks, and approved service limits.
Micron Rating Selection for Industrial Liquid Filters
Select a liquid filter micron rating using nominal and absolute definitions, retention evidence, process quality, hydraulic limits, and seal control.
Industrial Filter Tank Sizing: Flow Rate, Pressure, and Holding Capacity
Size industrial filter tanks using flow, filter area, solids load, pressure allowance, retention requirements, and verified cleaning-cycle evidence.
Heat Exchanger FAT Checklist: Pressure Test, Cleanliness, and Documents
Prepare a heat exchanger FAT checklist covering drawings, material records, pressure boundaries, cleanliness, deviations, preservation, and shipment release.